How to Use the Jianfan Hemoperfutor User Manual: Complete Setup, Safety, and Troubleshooting Guide

Table of Contents
Jianfan Hemoperfutor User Manual
The Jianfan Hemoperfutor is a specialized medical filtration device designed to support blood purification. Its advanced technology ensures precise filtration for various medical needs.
Why Proper Use of the Device is Crucial for Patient Health
Correct operation ensures optimized filtration, reducing the risk of errors that could compromise patient safety.
Target Audience
Healthcare professionals, technicians, and trained caregivers who are responsible for the device’s handling and maintenance will find this manual beneficial.
Features and Benefits of the Jianfan Hemoperfutor Device
The Jianfan Hemoperfutor offers benefits like multiple filtration modes, adjustable flow rates, and easy maintenance, making it efficient and user-friendly in clinical settings.
Unboxing the Jianfan Hemoperfutor Device

What’s Inside the Box:
The package includes the main Hemoperfutor unit, power adapter, tubing, filters, user manual, and a warranty card.
Device Components Overview:
Each component plays a vital role in device functionality. A comprehensive breakdown is provided below:
Component | Function |
Control Panel | Allows setting adjustments |
Tubing Ports | Connects tubing for filtration flow |
Filter Compartment | Holds filtration cartridges |
Power Input | Connects to the power source |
Safety Guidelines and Precautions
General Safety Guidelines for Users:
Before using the Jianfan Hemoperfutor, familiarize yourself with all safety instructions to prevent accidents and equipment damage.
Important Device Placement and Setup Safety Rules:
Place the device on a stable, level surface in a well-ventilated area to ensure optimal function and longevity.
Environmental Requirements:
Maintain a dry environment to avoid moisture damage.
Electrical Safety:
Use only the specified power adapter to avoid electrical hazards.
Step-by-Step Setup and Installation Guide of
Setting up the Jianfan Hemoperfutor properly is crucial to ensure its effective and safe operation. Follow these short steps for a smooth installation process:
Initial Setup: Preparing for Installation
- Unboxing: Carefully unpack the device, making sure all listed components are included and undamaged. Place everything on a flat, clean surface.
- Location: Choose a stable, well-ventilated space near a power outlet. Avoid placing it in direct sunlight or near water sources.
Connecting the Power Adapter
- Check Voltage: Ensure the adapter is compatible with local voltage standards, typically 220V.
- Plug In: Firmly insert the power adapter into the device’s input and then connect it to a wall outlet. Wait to power on the device until all other components are connected.
Assembling and Securing Tubing
- Attach Tubing: Connect tubing to the device’s input and output ports, ensuring each connection is secure to prevent leaks.
- Secure Clamps: If clamps are provided, lock them around tubing connections to avoid accidental disconnections during use.
Confirming Tube Fittings and Power Source
- Check Connections: Double-check that all connections, including tubing and power, are tight and properly secured.
- Verify Power Stability: Ensure a stable power source is being used, ideally with a stabilizer to prevent surges.
Device Testing and Initial Power-Up
- Power On: Turn on the device and observe any startup indicators on the control panel. Listen for unusual sounds.
- Run Self-Check: Some models may perform an automatic self-check—allow this to complete to ensure everything is working.
- Flow Test: Run a brief flow test to verify tubing alignment and proper flow rate.
Operating the Jianfan Hemoperfutor

Turning the Device On
Use the power button to start the device and monitor initial diagnostic lights for readiness.
How to Monitor and Adjust Settings
The control panel allows real-time adjustments to flow rates and pressure for various filtration needs.
Selecting Filtration Modes
- Standard Mode: For routine operations.
- Emergency Mode: For faster, higher-pressure filtration in urgent situations.
Advanced Features:
Experienced operators can fine-tune pressure settings and enable self-cleaning mode for internal maintenance.
Modes and Functions of the Jianfan Hemoperfutor
Understanding Standard Mode:
Standard Mode is the default operation mode designed for routine filtration. It delivers a steady flow rate and standard pressure levels, making it ideal for most clinical situations. Users should ensure that all tubes and filters are correctly installed before starting in this mode to achieve consistent performance.
Emergency Mode: Key Features and Setup:
Emergency Mode is activated when faster filtration at higher pressures is required, typically in critical situations where time is of the essence. This mode increases the device’s flow rate and pressure, expediting filtration. Proper setup and close monitoring are essential to prevent overloading the system during emergency use.
Self-Cleaning Mode: Maintaining Filter Health:
Self-Cleaning Mode is a crucial feature that extends filter life and enhances device sanitation by automatically flushing out residues. This mode should be activated after each use or at intervals recommended by the manufacturer to maintain optimal device health. Self-cleaning reduces maintenance frequency and ensures high filtration quality.
Pressure and Flow Rate Adjustments for Optimal Performance:
Adjusting pressure and flow rate allows users to customize the filtration process for different needs. Experienced operators can use these settings to fine-tune device performance, providing flexibility to adapt to various clinical requirements. Over time, adjustments may need to be recalibrated to match the wear and tear on components.
Maintenance and Cleaning
Routine Device Maintenance:
Routine maintenance is key to prolonging the life and efficiency of the Jianfan Hemoperfutor. Regular checks should be performed on all external and internal parts to ensure they are free of blockages, wear, and damage. This includes inspecting tubing connections, filter integrity, and the control panel’s responsiveness.
Regular Checks for Blockages:
Blockages in the tubing or filters can severely impact the device’s performance. To prevent this, users should visually inspect tubing connections for any clogs and examine filter compartments to verify they are functioning properly. Addressing blockages promptly can avoid more significant issues.
Replacing Filters: Signs of Wear:
Filters should be replaced when signs of wear are observed, such as reduced filtration efficiency, slower flow rates, or visible buildup. Regular filter replacement ensures the device continues to operate at its peak, preventing contaminants from accumulating within the system.
How to Clean the Device Safely:
Cleaning the device safely involves both exterior and interior components. Exterior surfaces can be wiped with an alcohol-based disinfectant to maintain hygiene. For internal parts, use the self-cleaning mode or follow the manufacturer’s specific cleaning instructions to prevent damage.
Disinfection and Safe Storage:
After use, disinfect the device to prevent cross-contamination, especially in shared clinical settings. When not in use, store the device in a clean, dry area, covered to avoid dust buildup, and ensure it is kept away from moisture or direct sunlight.
Maintenance Task | Frequency | Action Details |
---|---|---|
Inspect Tubing | Weekly | Check for blockages and secure fit |
Clean Exterior | After Each Use | Wipe down with disinfectant |
Replace Filters | Monthly | Change when wear or reduced function |
Troubleshooting Common Issues
Common Problems and Their Solutions:
Troubleshooting common issues quickly ensures minimal downtime and maintains device effectiveness. The most frequently encountered issues include the device not powering on, low filtration rate, and inconsistent pressure levels.
Device Not Turning On: Power Source Check:
If the device does not power on, first confirm the power adapter is correctly connected and the outlet is functioning. A quick test with another electrical device can help verify the outlet’s power supply. If the problem persists, contact technical support.
Low Filtration Rate: Cleaning or Replacing Filters:
Reduced filtration rates are often caused by clogged or worn filters. Cleaning the filters or replacing them can often resolve this issue. Additionally, inspect the tubing for potential blockages that may be impacting flow rate.
How to Diagnose Advanced Problems:
For issues that are not resolved by basic troubleshooting, refer to the troubleshooting section in the user manual. Advanced diagnostics may include checking internal connections or contacting the manufacturer’s support for further guidance.
When to Contact Customer Support:
Persistent issues, especially those affecting device performance or safety, should be referred to Jianfan’s customer support team. They can provide further assistance and may suggest repairs or part replacements if needed.
Proper Storage of the Device

Safe Storage Practices:
Storing the Jianfan Hemoperfutor properly when not in use is critical to preserving its longevity and performance. Ensure it is stored in a dust-free, dry, and well-ventilated area, ideally covered with a cloth or protective case to prevent dust accumulation.
Ideal Conditions for Storing the Hemoperfutor:
Keep the device away from moisture and extreme temperatures. Room temperature storage conditions (between 20-25°C) with low humidity levels are ideal to prevent electrical and mechanical damage.
Device Protection During Inactive Periods:
During periods of inactivity, consider occasional maintenance checks to keep the device in working condition. This includes running the self-cleaning mode monthly to prevent filter and tubing degradation.
Storage Requirement | Ideal Condition |
---|---|
Temperature | Room temperature (20-25°C) |
Humidity | Low humidity |
Covering | Use protective case or cloth |
Technical Specifications
Key Device Specifications:
The Jianfan Hemoperfutor’s technical specifications help ensure proper handling and compatibility with power sources and other equipment in clinical settings. Here’s an overview of essential details:
- Voltage: 220V, compatible with standard medical equipment power outlets.
- Weight and Dimensions: At approximately 5 kg and compact dimensions, it is easy to handle and transport.
- Filtration Capacity: Handles up to 5 liters per minute, providing efficient filtration for various medical applications.
Specification | Detail |
---|---|
Voltage | 220V |
Weight | 5 kg |
Dimensions | 30 x 20 x 15 cm |
Filtration Capacity | 5 liters per minute |
Warranty Information and Customer Support
Warranty Terms and Conditions:
The Jianfan Hemoperfutor comes with a standard one-year warranty covering manufacturing defects. Any misuse or unauthorized modifications will void the warranty, so users should adhere strictly to the manual’s guidelines.
What’s Covered Under Warranty:
Warranty coverage includes defects in material or workmanship but does not cover regular wear and tear, accidental damage, or issues arising from improper use.
How to Contact Jianfan Customer Support:
For warranty claims or support inquiries, users can reach Jianfan’s customer support through their website, email, or customer service hotline. Their trained support team can assist with technical issues, troubleshooting, and guidance on repairs.
Support Resources and Channels:
In addition to direct support, Jianfan provides online resources like video tutorials, manuals, and a comprehensive FAQ section for troubleshooting and maintenance tips.
Additional Tips and Recommendations
Best Practices for New Users:
New users should review the manual thoroughly before operating the device. Familiarize yourself with each mode and function, starting with Standard Mode to build confidence before using advanced features.
What to Avoid During Setup and Operation:
Avoid exposing the device to water, extreme temperatures, or unsteady power sources, as these factors could compromise performance or safety.
How to Ensure Long-Term Device Performance:
Regular maintenance, careful handling, and following all usage and storage guidelines can significantly extend the life of the Jianfan Hemoperfutor.
Conclusion
The Jianfan Hemoperfutor user manual equips healthcare professionals with the knowledge needed to operate, maintain, and troubleshoot the device effectively, ensuring safe and optimal use in clinical settings. Following recommended practices for setup, daily operation, and maintenance will preserve the device’s functionality and extend its lifespan, supporting reliable performance in patient care.
What should I do if the device isn’t powering on?
Check that the power adapter is securely connected to both the device and a stable power source. Ensure the outlet is functioning, and confirm the device’s power switch is on. If the problem persists, refer to the troubleshooting section or contact customer support.
 How often should I replace the filters?
 Filters should be replaced according to the manufacturer’s guidelines, typically every few months or when the device indicates reduced filtration efficiency. Regular inspection will help determine if replacement is needed sooner.
How do I clean the device and its components?
Clean the exterior with a soft, damp cloth and follow the manual’s instructions for safely disinfecting internal parts and tubing. Avoid using harsh chemicals and ensure the device is completely dry before use.
Can I use the device continuously for several hours?
 Yes, the Jianfan Hemoperfutor is designed for continuous use. However, check the manual for any maximum usage guidelines and give the device periodic breaks if recommended.
What are the common maintenance tasks?
Regular maintenance includes checking tubing for blockages, replacing filters as needed, cleaning the device, inspecting all connections, and storing it in a clean, dry place when not in use.